• PR 3606 - Lamb's Tongue

     

    The Lamb’s Tongue motif in ornament can be found in designs dating back to the Greeks. This simple yet elegant moulding is a wonderful way to begin a panel composite.

     

    1/2"W x 1/4"D x 94"L

     

    CAD

       
  • RMF 6630 - Lamb's Tongue

     

    Another striking example of the Lamb’s Tongue linear with nicely rolled dimension.

     

    1/2"W x 3/8"D x 94"L

     

    CAD

       
  • PR 2277 - Lamb's Tongue

     

    Here, we’ve taken the Lamb’s Tongue and recessed it into a panel moulding for easier installation.

     

    3/4"W x 3/8"D x 94"L

     

    CAD

       
  • PR 5030 - Lamb's Tongue

     

    This Lamb's Tongue linear has great carving and depth.

     

    3/4"W x 3/8"D x 94"L

     

    CAD

       
  • RMF 7009 - Lamb's Tongue Linear

     

    With a profile just a little over 1/4”, this Lamb’s Tongue linear serves as a wonderful choice for applications where height or protrusion are an issue.

     

    5/16"W x 1/4"D x 81"L

     

    CAD

       
  • PR 5598 - Lamb's Tongue Linear

     

    A great Lamb's Tongue linear with classic carvings and relief.

     

    7/8"W x 1/2"D x 94"L

     

    CAD

       
  • PR 5126 - Lamb's Tongue Linear

     

    This Lamb's Tongue version has straighter lines, lending to an Art Deco feel.

     

    7/8"W x 3/8"D x 94"L

     

    CAD

       
  • RMF 288 - Lamb's Tongue Linear

     

    Another fine Lamb’s Tongue linear with nicely carved dimension and relief.

     

    1"W x 3/8"D x 93"L

     

    CAD

       
  • PR 5441 - Lamb's Tongue Linear

     

    A different version of the Lamb's Tongue.

     

    1"W x 1/4"D x 94"L

     

    CAD

       
  • PR 2733 - Lamb's Tongue (French Variation)

     

    This is a French variation of the Lamb’s Tongue linear. Notice the lovely alternating bellflowers.

     

    1"W x 7/16"D x94"L

     

    CAD

       
  • PR 4300 - Acanthus and Tongue

     

    This wonderfully carved Lamb’s Tongue linear incorporates an alternating acanthus leaf.

     

    1 1/8"W x 1/4"D x 94"L

     

    CAD

       
  • RMF 2276 B - Lamb's Tongue Linear

     

    The RMF 2276B Lamb’s Tongue has a nicely rounded profile at 3/4”.

     

    1 1/4"W x 3/4"D x 67"L

     

    CAD

       
  • RMF 1992 - Lamb's Tongue

     

    This linear has the Lamb’s Tongue rolling on to an incorporated flat plane or “backer”. This dimensional moulding serves well when assimilated into a casing or panel moulding.

     

    1 1/4"W x 3/4"D x 91"L

     

    CAD

       
  • RMF 1022 - Chicago Leaf and Tongue

     

    This carving was once part of a celebrated mansion in Chicago, circa 1880. It is richly carved and small in scale. It is especially effective as a horizontal trim for kitchens and libraries. It is appropriate to all periods.

     

    2 1/4"W x 1 1/4"D x 68"L

     

    CAD

       
  • RMF 2060 E - Conseil Underpanel Splicer

     

    This moulding is a combination of the RMF 1194 and a lambs tongue. This combination is the linear section of RMF 2060C. It too has many varied applications as an augmentation for setting up wall panels. As we began to use this piece we liked it so much that we made separate corners for it for expanded design applications. Se RMF 2060H - right and left.

     

    3 1/2"W x 3/4"D x 93"L

     

    CAD

       
  • RMF 1036 - Acanthus and Tongue

     

    In addition to the normal applications, we have also used this piece to conceal a small indirect lighting track such as on a wall or soffit.

     

    3 9/16"W x 1 7/16"D x 90"L

     

    CAD

       
  • RMF 40 - Lamb's Tongue Casing

     

    This carving was originally part of a chair rail in the library of a mansion in Wisconsin, circa 1870. It reflects a certain restrained simplicity with a beautifully detailed Lamb’s Tongue. We have not altered the piece from the original.

     

    4"W x 1 3/8"D x 94"L

     

    CAD

       
  • RMF 1025 - Acanthus and Tongue

     

    The acanthus and tongue is an eternal part of architectural history and is part of every period - a perennial motif. The Lamb’s Tongue ornament subordinates beautifully in the background of this linear.

     

    4 1/4"W x 3/4"D x 70"L

     

    CAD

       
  • RMF 5924 - Tongue and Bellflower

     

    This combination of ornamental elements is basic throughout architectural history. It can stand alone or act as a subordinate detail to a more florid ornamentation.

     

    7 1/2"W x 7/8"D x 91"L

     

    CAD